In this study, four commercially available membranes (NF270, NF90, CR100, and SW30) spanning the loose NF to tight RO separation ranges were investigated for their PFAS rejection performance. The specific focus was devoted to evaluating the removal of perfluoroalkyl acids (PFAAs) in a full-scale closed-circuit desalination (CCD) pilot module operating at 97% recovery. The results of these membrane evaluations were compared based on standard performance metrics (e.g., conductivity rejections and total organ carbon [TOC] rejection), PFAA rejection, and estimated specific energy consumption. Results from this study indicate that tight NF and RO membranes can be used to concentrate PFAS streams by a factor of 33 (97% recovery) with very low permeate PFAA concentrations.
Andew Safulko
Closed-Circuit High-Pressure Membrane Systems for the Separation of Per and Polyfluoroalkyl Substances
Authors: Andrew Safulko, Dr. Christopher Bellona, Dr. Tzahi Cath, Bahareh Tajdini, Michael Boyd
Membrane Technology Conference 2022
Recent Papers and Reports
- Microplastics from different viewpoints
- Using Artificial Intelligence and Machine Learning Operations in the Water Industry
- Multi-class machine learning classification of PFAS in environmental water samples: a blinded test of performance on unknowns
- Fate of perfluoroalkyl and polyfluoroalkyl substances (PFAS) through two full-scale wastewater sludge incinerators
- An Evaluation of Biosolids Management in Maine and Recommendations for the Future
- Pathways and Barriers to Corporate Water Stewardship in the Colorado River Basin
- Transformation of organic carbon through medium pressure (polychromatic) UV disinfection of wastewater effluent during wet weather events
- Application of a fluorescence EEM-PARAFAC model for direct and indirect potable water reuse monitoring: Multi-stage ozone–biofiltration without reverse osmosis at Gwinnett County, Georgia, USA
- The Risk of the Status Quo: New Thinking to Transform Business Practice
- Preponderance of Evidence – Advances in Using Distributed Temperature Sensing to Locate and Quantify Sources of I/I