Brown and Caldwell Home Page

Brown and Caldwell engineers and scientists are technical and thought leaders in the environmental sector. Meet the people who have been advancing innovation for more than 70 years.
Author      Title/Abstract      

Two for the Price of One: Increasing Digester Capacity while Reducing Filamentous Bulking through Co-thickening at Tacoma’s CTP
Author: Kimberly Kelsey and Pamela Randolph
Date: 1/211
Preprint, WEF Residuals and Biosolids Management Conference 2010, Savannah, GA, May 23-26, 2010

As many wastewater treatment facilities are striving to increase the sustainable operation of their facilities, they turn to increasing process efficiency and effectiveness while maximizing the use of existing infrastructure. This approach requires innovative, holistic solutions and “out of the box” thinking. The City of Tacoma (City) had what appeared to be two significant but separate process constraints at their Central Treatment Plant (CTP), one associated with the digestion process, the other with the liquid stream. After consideration of the overall plant process, it was found that fairly straight-forward modifications to one existing process could address both issues. The CTP is a secondary treatment facility that uses high purity oxygen (HPO) activated sludge units for biological oxidation of wastewater. The secondary treatment system is currently designed for peak flows of up to 90 million gallons per day (mgd). Flows beyond 90 mgd receive advanced primary treatment and disinfection but no secondary treatment. Waste activated sludge (WAS) is pumped to the dissolved air flotation tanks (DAFT) for thickening, with underflow returned to the head of the HPO tanks. Thickened WAS is combined with the primary sludge from the CTP and primary sludge that is trucked in from the North End Treatment Plant (NETP) and mixed in a Blended Sludge Storage Tank. The solids are then heated and processed through autothermal aerobic digesters. The aerobically digested solids then flow through a series of 3-stage temperature-phased anaerobic digesters for further stabilization. The process produces Class A biosolids which the City of Tacoma markets as TAGRO. It is anticipated that future loadings will increase due to increased service area and the potential addition of organic food waste. Also, the City has identified a long term goal to promote the generation of green energy through cogeneration. To facilitate this, hydraulic flow to anaerobic digesters must be reduced in order to increase capacity and increase gas production. Concurrent with its energy and capacity goals, the City identified the need to minimize the formation of volatile fatty acids in the primary clarifiers, which would reduce the formation of filaments in the secondary system. Typically, volatile acid reductions are achieved by increasing the solids removal rate from the primary clarifiers. However, increasing the solids removal rate would increase the hydraulic load to the digesters and further reduce capacity. After careful analysis, it was determined that an upgrade to the existing DAFTs to allow for co-thickening of primary and secondary solids would provide a cost effective solution to remove these two process constraints. Co-thickening in the DAFTs would allow the inventory in the primary clarifiers to be kept at a minimum, reducing VFA production. The enhanced thickening of both primary and secondary solids would also reduce the hydraulic load to the digesters, recovering capacity for other uses. Brown and Caldwell (BC) worked with the City to design modifications to four existing DAFTs to support co-thickening of WAS and primary solids at the CTP. The design team evaluated the DAFTs to identify process, mechanical, structural, electrical and instrumentation constraints of the system. By using this approach, the reuse of existing equipment and infrastructure could be maximized while providing an effective means of thickening raw solids. A capacity evaluation of the existing DAFTs, confirmed with stress testing, showed that there is sufficient capacity to accommodate co-thickening through the year 2027, with all four DAFTs in service. The capacity of three DAFTs is projected to last through the year 2013. Pre-design for the CTP solids system included an option to pump—in various combinations—primary sludge, thickened waste activated sludge (TWAS) from the DAFTs, and sludge from a new solids receiving station (where sludge from the NETP is discharged) to the blended solids storage tank (BSST). In the future, liquid food wastes might also be discharged to the solids receiving station, and this may require modification to the piping system of the receiving station. The contents of the BSST are mixed and pumped through new water-to-sludge and sludge-to-sludge heat exchangers prior to being discharged to the auto-thermal aerobic digesters, the first stage of the digestion process. A business case evaluation (BCE) model, developed by BC, was used to facilitate major design decisions.

This library contains published materials for which copyrights may be owned by entities other than Brown and Caldwell, but which are stored for limited uses by BC employees. Technical papers authored by BC employees generally may be printed and shared electronically with clients and prospective clients outside BC. Technical papers cannot be sold, and technical papers shared outside BC must have proper attribution of the original sponsoring organization or conference where the paper was presented. This attribution is embedded in each technical paper file when it is loaded into this library. Published articles from magazines or trade journals which are stored in this library are FOR INTERNAL USE ONLY and SHOULD NOT be distributed to clients or others outside BC, without express permission of the copyright owner. For questions regarding copyrights associated with any document in this library, or questions regarding copyrights in general, contact the Legal Department.